Semi-automatic Case Packer-ZJ-ZXJ18
Here are the typical steps of semi auto carton casing machines:
Carton erecting: The machine automatically erects the carton boxes from a flat sheet to their original shape.
Carton feeding: The erected carton boxes are then fed into the machine through a conveyor system or manually.
Product loading: The products to be packaged are then loaded into the cartons through a manual
Flap folding: The machine then folds the top and bottom flaps of the carton boxes.
Sealing: The flaps are sealed either by hot melt glue, tape, or a combination of both.
Carton ejection: The finished carton boxes are then ejected out of the machine and are ready for transportation.
| Production capacity | 15-18 cases/min |
| Station | Total: 19; Length of station: 571.5mmoperation station: 6 |
| Carton range | L: 290-480mm, W: 240-420mm, H: 100-220mm |
| Motor power | power: 1.5KW, rotate speed: 1400r/min |
| Glue-smelting machine power | 3KW (max) |
| Power | three-phase five line, AC380V, 50HZ |
| Compressed air | 0.5-0.6Mpa, 500NL/min |
| Machine dimensions | (L)6400mm x(W)1300mm x(H)2000mm (no entrance belt conveyor ) |
| Height of carton discharge | 800mm±50mm |
Features
1. To finish the adjustment for product replacement in 5-20 minutes.
2. Save 20-30% carton cost comparing to the manual casing.
3. Nice sealing and environmental protection
